G10T8 10W Germicidal UV-C Fluorescent Lamp
Lamps ordered will be shipped the next business day by USPS Priority
UPS. Large orders may qualify for a discount and may not
for next day shipment. If you do not know what lamp you require or for
lamps not listed, email
your request or call 336-882-2854. To order, please use our secure
shopping cart above or call 336-882-2852 or 800-692-3051. Click to go to our Home Page, View Cart and to find Shipping Information.
Wattage: 10W, 10 Watt Watts
Glass: T-8, T8 Clear, UV Transmitting Glass
Base: G13 BiPin
UV Emission: 254nm
UVC Output: 1.9W
Overall Length: 13.04", 13.04 Inches or 331.2mm Excluding Pins, MOL 13.6" or 345.5mm Including the Pins
Average Rated Life: 6,000 hours
Lamp emits UV rays of 254nm and can kill most germs and
microorganisms. Emits no ozone.
You may need the FG-1E, FS-1P or some other starter. If you replace the lamp and it does not work then most likely you need a new starter. Since starters are inexpensive and shipping is relatively expensive it my be a good idea to see what starter your unit uses, if any as sometimes the starting is a function of the ballast, and add a starter or two to your order.
Occasionally a customer will have a problem fitting in a new G10T8 lamp. While the maximum overall length is 13.6" the lamp can be a little shorter. If your equipment is adjusted for a tight fit with a lamp shorter than 13.6" the new lamp may be difficult or impossible to install. Fortunately there is an easy fix. You will find that one of the two socket ends is adjustable. You can loosen the screw(s) holding the socket in place, slide the socket so the opening is slightly wider, retighten the screw(s), and then install the new lamp.
Alternate Part Numbers: G10T8/G,
AU/LG10T8, TUV10T8, FG10T8, Sterilamp®, Sankyo Denki,
Galaxy GXG10T8, LUMINCO LMG10T8DC, Sunlite, F 10W GL, F10WGL, S10WGL,
G10T8/G, 2W10S15W-2135, OPP-UV10W, TUV/10W/2P, GRM-0100, Ultraviolet,
Hot Cathode, HYBEC,
Westinghouse, G10T8/10W, 11-054, LS10, Spectronics,
Sankyo Denki, Ultra-Violet, TMC Pond UV Lamps, Toshiba GL-10, GE 29498
9.5W, Eiko 41386, Ushio 3000006, TUV/10W/T8/2P, 46722, 23374 G10T8/OF,
AU/LG10T8, 21902A, SD-G10T8, 37080, GL10, GL-10, F10T8/GL, DYF10T8GL,
DY/F10T8/GL, G10W, Hua Yuan
Germicidal lamps are clear with
special UV transmitting glass.
For use in sterilizers and air and water purifiers.
This is an ultraviolet C (253.7 nm wavelength) bulb for use in
sterilization, water and air purification and surface disinfection.
Used in the Forming and Disinfection of Contact Lenses. Used in UV
Sterilizers for Fish Aquariums and Ponds. Fixed wavelength
spectrophotometer detector. Germicidal lamps allow 253.7nm UV-C
radiation from the mercury discharge to pass through the glass thus
penetrating and inactivating the DNA of most micro-organisms.
Avoid direct exposure of eyes and skin under germicidal lamps. To
prevent possible serious injury, eyes and skin should not be exposed to
direct or reflected ultraviolet power emitted by this lamp. This lamp
is in Risk Group 3 per ANSI/IESNA RP-27.3-96. Adequate protection
should be provided by clothing, gloves, opaque materials, and ordinary
window glass. Although this lamp will operate in standard fluorescent
fixtures, it should not be used for general lighting applications.
Go to our Germicidal Safety Sheet for
more lamp handling details.
Note: This lamp contains Mercury. Manage in accord with disposal laws.
Germicidal fluorescent light bulbs are most often used with specialty
air and water purification systems in hospitals, food handling, and
HVAC. Applications include food processing, medical facilities, air
conditioning systems, pharmaceutical production, clean room, drinking
water, photochemistry, phototherapy, dermatology, wastewater,
laboratory/research, and other sterilization and disinfection needs.
For use only in fixtures and equipment designed for germicidal lamps.
Best Beauty Equipment
Model T-209, 110V 60Hz 10W
D-209, D209 Total Beauty Equipment
209 Sterilizer-Some 209 Units Use The G8T5 Lamp
T209 & T389
Germicidal Cabinet T-209
UV Sterilizer with Timer - 389
115V 60HZ 20W
Cross reference information is designed to help you find the
correct lamp for your application. We do not verify the accuracy of
this information. You are responsible for ordering the correct lamp and
we make every attempt to help you in that process. We recommend that
you confirm the information with the equipment manufacturer before
800 Burton Avenue, Suite 107
High Point, NC 27262
Order Line: 800-692-3051
Technical Support Line: 336-882-2854
Fax Line: 336-882-2819
Hours: 8 AM to 4 PM EST Monday through Friday
changes, invoice copies, tracking and delivery confirmation numbers,
order status, product availability, payment options, shipping quotes,
returns, damage claims
Technical Support: Help
finding a product not listed, determining the correct lamp for your
application, lamp handling and premature lamp failures
Large international orders that require special shipping arrangements
If you have compliments, complaints, suggestions, or help with
areas not listed above please contact: