JDR Cover Glass 120V 50W E27 Lamp
JDR Cover Glass 120V 50W E27

69mm±1mm $3.95 Each

71mm±1mm $3.95 Each

73mm±1mm $3.95 Each

75mm±1mm $3.95 Each

We recommend providing an exact measurement with a caliper tool or sending a sample for us to meaure.

69mm±1mm is commonly used where a beauty ring is added after installing the lamp. 71mm±1mm is the length that makes most customers happy most of the time. 73mm±1mm is the size most commonly needed when a longer lamp is needed. 75mm±1mm is longer than most customer samples. Some customers have been told they need 75mm only to find that the 75mm is too long.

If the lamp you select is too short then the lamp will not make contact with the bottom of the socket and will not work. If you select a lamp that is too long it will work but may stick out beyond the frame of the range hood and if there is a beauty ring may prevent installation of the ring.

Lamps ordered will be shipped the next business day by USPS Priority Mail or UPS. Large orders may qualify for a discount and may not qualify for next day shipment. If you do not know what lamp you require or for lamps not listed, email your request or call 336-882-2854. To order, please use our secure shopping cart above or call 336-882-2852 or 800-692-3051. Click to go to our Home Page, View Cart and to find Shipping Information.

Wattage: 50W, 50 Watt Watts
Amperage: .42A
Voltage: 120V, 120 Volt Volts
Base: E27, E-27 European Medium Screw
Glass: JCR-C, 2 Inch Reflector with Cover Glass
Average Life: 2000 Hours
Lumens: 3800
Color Temperature: 3000°K
Maximum Overall Length: 76mm/3"
Minimum Overall Length: 68mm/2.67"
Maximum Overall Diameter: 51mm/2"

Note: These lamps are typically used in range hoods. Range hood lamp lengths can vary from brand to brand, from unit to unit within a brand, and can even be different from location to location on the same range hood. The typical lamp length is about 71mm ±1mm and so is what we typically ship. We find that customer original lamps range from 68-76mm in length. If our lamp is slightly shorter than your original lamp then it may be necessary to bend the center tab in your socket out so that the tab makes contact with the socket. Some range hoods allow you to adjust the socket from behind in the fixture. If our lamp is slightly longer than your lamp it does not usually create a problem but in rare cases it prevents a retainer ring from going back on after installation in which case, while the lamp will work, you will need a shorter lamp to get the ring back on the range hood if you cannot adjust your socket position. Providing an accurate measurement of your lamp prior to ordering, from the bottom of the socket to the top edge of the glass bowl, will allow us to select a product that best matches your original. This measurement cannot be made by eye with a ruler because depending on your perspective the perceived length can vary quite a bit. A caliper tool is required for proper measurement.

Alternate Part Number: 120V50W, JDR E27 120V 50W CE, JDRC, JDR-C, 50W120V, Leuci Dichroic Pratica 25° YP-B0 YP-80, 25 YP-7K, Zephyr Z0B0011, Halogen 50W, JER, E27, Long, Z0B-0011


Integrated Ventilation System IVS2, 62351


ZV48 Monogram Range Hood
GE Monogram Range Hood Model number ZV36T WB08X10028, 120V, 50W, PAR16 Halogen Flood with Standard Base

Leuci Dichroic Pra Tika 50W 120V 25° YP-8A CE


Range Hood Fan


Range Hood
Zephyr brand – Milano wall mount venthood
Napoli Island hood model ZNA-M90S (36")

Some Par Cans

Cross reference information is designed to help you find the correct lamp for your application. We do not verify the accuracy of this information. You are responsible for ordering the correct lamp and we make every attempt to help you in that process. We recommend that you confirm the information with the equipment manufacturer before ordering. 

800 Burton Avenue, Suite 107
High Point, NC 27262
336-882-BULB (2852)

Order Line: 800-692-3051
Technical Support Line: 336-882-2854
Fax Line: 336-882-2819

Hours: 8 AM to 4 PM EST Monday through Friday

Sales: Address changes, invoice copies, tracking and delivery confirmation numbers, order status, product availability, payment options, shipping quotes, returns, damage claims

Technical Support: Help finding a product not listed, determining the correct lamp for your application, lamp handling and premature lamp failures

International Orders: Large international orders that require special shipping arrangements and quotes

If you have compliments, complaints, suggestions, or help with areas not listed above please contact:

Ron Miller
General Manager