Lamps ordered will generally be shipped the next business day by USPS Priority
Mail or
UPS, check here for Shipping Information. Large orders may qualify for a discount and may not
qualify
for next day shipment. If you do not know what lamp you require or for
lamps not listed, email
your request or call 336-882-2854. To order, please use our secure
shopping cart or call 336-882-2852 or 800-692-3051. Click to go to our Home Page and $0.00.
Wattage: 1600W, 1600 Watt, Watts
Voltage: 235V, 240 Volt, Volts
Base: SK15 Flexi Ceramic Base with 5.5" PTFE 17AWG Insulated Wire Leads with M4 Fork Terminal
Glass: T3 Clear, 10mm Diameter, White Reflector
Maximum Overall Length: MOL 8.875", 226mm
Heated Length: 6.6"
Color Temperature: 2700°K, 2700K
Burn Position: Universal
Average Rated Life: 5000 Hours
Filament: C-8
Infrared Medium Wave Quartz Heat Lamp
Flash Cure Infra-Red
A = 222±2mm
B = 182mm Nominal
C = 140±5mm
E = 15.1mm
F = 10.5mm
G = 435mm Nominal
H = 5mm Maximum
Typical Use: Drying Water Based Inks, Offset Litho, Wood Treatment, Wallpaper, Shrink Wrap, Blow Moulding, Thermoforming, Screen Printing on Textiles
Alternate Part Number: QH1600W-235V-SK15, Victory 64231652, Philips, Phillips, Dr. Fischer 14135Z/98, Ushio QIH230-1600/ZH, Toshiba JHC 235V 1600W 155BfH1
SIG PET Blow Moulding
Cross reference information is designed to help you find the
correct lamp for your application. We do not verify the accuracy of
this information. You are responsible for ordering the correct lamp and
we make every attempt to help you in that process. We recommend that
you confirm the information with the equipment manufacturer before
ordering.
Technical Support: Help
finding a product not listed, determining the correct lamp for your
application, lamp handling and premature lamp failures
336-882-2854 support@replacementlightbulbs.com
International Orders:
Large international orders that require special shipping arrangements
and quotes in@replacementlightbulbs.com
If you have compliments, complaints, suggestions, or help with
areas not listed above please contact: