G25T8 25W Germicidal UV-C Light Bulb Replacement Lamp
About 17.75" long including the pins and 17.19" excluding the pins.
Osram $10.23 Each - 404 Remaining In Stock
GE with Cover Guard $14.23 Each - 171 Remaining In Stock
Lamps ordered will generally be shipped the next business day by USPS Priority
UPS, check here for Shipping Information. Large orders may qualify for a discount and may not
for next day shipment. If you do not know what lamp you require or for
lamps not listed, email
your request or call 336-882-2854. To order, please use our secure
shopping cart or call 336-882-2852 or 800-692-3051. Click to go to our Home Page and View Cart.
Wattage: 25W, 25 Watt Watts
Glass: T-8, T8 Clear, UV Transmitting Glass
Base: G13 BiPin
UV Emission: 254nm
UVC Output: 6.9W
Maximum Overall Length: 17.2" or 437mm Excluding Pins, MOL 17.875" or 454mm Including the Pins
Filament to Filament Length: 351mm
Average Rated Life: 8,000 Hours
Burn Position: Universal, S180
Lamp emits UV rays of 254nm and can kill most germs and
microorganisms. Emits no ozone.
You may need the FG-1E, FS-25 or some other starter. If you replace the lamp and it does not work then most likely you need a new starter. Since starters are inexpensive and shipping is relatively expensive it my be a good idea to see what starter your unit uses, if any as sometimes the starting is a function of the ballast, and add a starter or two to your order.
Occasionally a customer will have a problem fitting in a new G25T8 lamp. While the maximum overall length is 18" the lamp can be a little shorter. If your equipment is adjusted for a tight fit with a lamp shorter than the new lamp it may be difficult or impossible to install. Fortunately there is an easy fix. You will find that one of the two socket ends is adjustable. You can loosen the screw(s) holding the socket in place, slide the socket so the opening is slightly wider, retighten the screw(s), and then install the new lamp.
Alternate Part Numbers: Toshiba GL-25, Osram 23355 23355-0, G25T8/OF, SANKYO DENKI, Ultraviolet, 625T8, Sylvania 23376, 23376-0, Puritec HNS, G25W, F25T8/GL, G25T8/0F, Ushio 3000008, GE 72762
Germicidal lamps are clear with
special UV transmitting glass.
For use in sterilizers and air and water purifiers.
This is an ultraviolet C (253.7 nm wavelength) bulb for use in
sterilization, water and air purification and surface disinfection.
Used in the Forming and Disinfection of Contact Lenses. Used in UV
Sterilizers for Fish Aquariums and Ponds. Fixed wavelength
spectrophotometer detector. Germicidal lamps allow 253.7nm UV-C
radiation from the mercury discharge to pass through the glass thus
penetrating and inactivating the DNA of most micro-organisms.
Avoid direct exposure of eyes and skin under germicidal lamps. To
prevent possible serious injury, eyes and skin should not be exposed to
direct or reflected ultraviolet power emitted by this lamp. This lamp
is in Risk Group 3 per ANSI/IESNA RP-27.3-96. Adequate protection
should be provided by clothing, gloves, opaque materials, and ordinary
window glass. Although this lamp will operate in standard fluorescent
fixtures, it should not be used for general lighting applications.
Go to our Germicidal Safety Sheet for
more lamp handling details.
Note: This lamp contains Mercury. Manage in accord with disposal laws.
Germicidal fluorescent light bulbs are most often used with specialty
air and water purification systems in hospitals, food handling, and
HVAC. Applications include food processing, medical facilities, air
conditioning systems, pharmaceutical production, clean room, drinking
water, photochemistry, phototherapy, dermatology, wastewater,
laboratory/research, and other sterilization and disinfection needs.
For use only in fixtures and equipment designed for germicidal lamps.
Luminaire Model # 25W 01BC-G25T8-4503
Cross reference information is designed to help you find the
correct lamp for your application. We do not verify the accuracy of
this information. You are responsible for ordering the correct lamp and
we make every attempt to help you in that process. We recommend that
you confirm the information with the equipment manufacturer before
800 Burton Avenue, Suite 107
High Point, NC 27262
Order Line: 800-692-3051
Technical Support Line: 336-882-2854
Fax Line: 336-882-2819
Hours: 8 AM to 4 PM EST Monday through Friday
changes, invoice copies, tracking and delivery confirmation numbers,
order status, product availability, payment options, shipping quotes,
returns, damage claims
Technical Support: Help
finding a product not listed, determining the correct lamp for your
application, lamp handling and premature lamp failures
Large international orders that require special shipping arrangements
If you have compliments, complaints, suggestions, or help with
areas not listed above please contact: